Electrical Equipment Inspection
Slide title
Write your caption hereButtonSlide title
Write your caption hereButtonSlide title
Write your caption hereButtonSlide title
Write your caption hereButton
-
Inverter Inspection and Maintenance Items
- Check the appearance of the inverter and the fixed frame for rust.
- Check whether the display board and lamp signal are normal.
- Check for water seepage inside the machine.
- Check whether the wire connector is damaged, loosened or hot melted.
- Check whether the cooling fan is working properly.
- Check for a strange sound or smell.
- Check for animal invasion.
- Check each electrical appliance for burn marks or burnout.
- Check whether the (DC/AC) switch is working properly.
- Check whether the temperature of the inverter is normal.
- Insulation resistance measurement.
- Clean the appearance of the inverter, the air inlet and outlet and the heat sink.
- Earthing resistance testing.
- External corrugated sheet inspection.
- Check whether the module bracket is loose or rusty.
-
AC Panel
- Check the appearance of the main body and the fixed frame for rust.
- The appearance of the main body is clean.
- Check for water seepage inside the machine.
- Check waterproof adhesive tape for exfoliation.
- Check for foreign objects inside the box and clean them away.
- Check for animal invasion.
- Check for a strange smell.
- Check each electrical appliance for burn or burnout.
- Check whether the circuit breaker is working properly.
- Insulation resistance measurement of each phase of three-phase power (which is included in the inverter inspection).
- Earthing resistance testing.
-
DC Combiner Box Inspection and Maintenance Items
- Check the appearance of the main body and the fixed frame for rust.
- The appearance of the main body is clean.
- Check for water seepage inside the machine. Check waterproof adhesive tape for exfoliation.
- Check for foreign objects inside the box and clean them away.
- Check for animal invasion.
- Check for a strange smell. Check each electrical appliance for burn marks or burnout.
- Check whether the circuit breaker is working properly.
- Check whether the surge absorber is normal.
- Check whether the fuse is in a conducting state..
- String open circuit voltage measurement
- String insulation resistance measurement
- Earthing resistance testing.
- Check whether each contact point is loose or oxidative.
-
Trunking (Tube)
- Check trunking (tube) for damage.
- Check whether the cover plate is fixed.
- Check trunking (tube) for rust.
- Check whether the metal hose is loosened or damaged.